Application of Total Station Scanner Technology in Geometric Quality Inspection of Steel Structure

doi:10.13474/j.cnki.11-2246.2018.0403

Abstract

Abstract: Steel structure geometric quality inspection is an important part of steel structure construction. High accuracy is an important factor in quality inspection, but the node location cannot be directly measured because of welding. High precision total station scanning technology is used to scan steel structure in the paper, and then the point cloud is preprocessed, the surface equations are established, node coordinates in measuring coordinate system are calculated, and are converted to design coordinate system, finally the geometric quality of steel structure is evaluated. The theoretical and practical researches shows that the method can match geometric quality inspection of steel structures.

Key words: steel structure, total station scanner technology, fitting, inspection

CLC Number:

DENG Nianwu, LI Meng, ZHANG Xiao, YANG Tong. Application of Total Station Scanner Technology in Geometric Quality Inspection of Steel Structure[J]. 测绘通报, 2018, 0(12): 153-155.

References

[1] 邓念武,李萌.实物逆向工程中全站扫描仪精度分析[J].测绘通报,2016(3):146-147.
[2] 王碧如,郭福元,肖俊,等.基于高精度激光全站仪的钢结构数字模拟预拼装技术研究[J].建筑施工,2016(12):1726-1729.
[3] 李东敏,范百兴,周蕴,等.全站式扫描仪测量原理及精度分析[J].测绘通报,2014(8):131-133.
[4] 朱晓康,邹进贵.MS50全站扫描仪性能研究[J]. 测绘通报,2015(S1):114-118.
[5] 王可伟,岳东杰,王性猛.基于单位四元数的三维坐标转换新方法[J].测绘与空间地理信息,2014(11):216-218.
[6] 李亚东. 数字模拟预拼装在大型钢结构工程中的应用[J]. 施工技术,2012(18):23-26.
[7] 张达飞,张建平,杜冰冰,等. 杭州来福士广场钢结构工程模拟预拼装技术应用[J]. 钢结构, 2014(6):56-60.
[8] 周克勤,吴志群. 三维激光扫描技术在特异型建筑构件检测中的应用探讨[J]. 测绘通报, 2011(8):42-44.
[9] 张毅,闫利,杨红,等. 地面三维激光扫描的系统误差模型研究[J].测绘通报,2012(1):16-19.
[10] 张毅,闫利. 地面激光点云强度噪声的三维扩散滤波方法[J].测绘学报,2013,42(4):568-573.
[11] 官云兰,程效军,施贵刚. 一种稳健的点云数据平面拟合方法[J]. 同济大学学报(自然科学版), 2008(7):981-984.
[12] 官云兰,刘绍堂,周世健,等. 基于整体最小二乘的稳健点云数据平面拟合[J]. 大地测量与地球动力学, 2011,31(5):80-83.
[13] 浮丹丹,周绍光,徐洋,等. 基于主成分分析的点云平面拟合技术研究[J]. 测绘工程, 2014(4):20-23.
[14] 李孟迪, 蒋胜平, 王红平. 基于随机抽样一致性算法的稳健点云平面拟合方法[J]. 测绘科学, 2015(1):102-106.
[15] 江刚武,姜挺,龚辉. 四元数摄影测量定位理论与方法[M]. 北京:科学出版社, 2016.