High-precision terrain-based on-orbit geometric calibration method for laser altimeter

doi:10.13474/j.cnki.11-2246.2024.0708

Abstract

Abstract: The digital calibration method for laser altimeters has attracted increasing attention due to its prominent advantages of high calibration frequency and low consumption of manpower and resources. This paper proposes a “two-step” digital calibration method for laser altimeters, focusing on the geometric positioning model of linear regime laser altimeters. A geometric calibration model concerning roll angle, pitch angle, and range system error is constructed, and calibration tests are conducted using publicly available reference terrain data SRTM and high-precision digital calibration fields. Comparing and analyzing with the actual field detector experimental calibration data of the GF-14. The results show that the geometric calibration method proposed in this paper has an angle difference within 0.5 arcseconds and a ranging difference within 0.2 m compared to the ground detector calibration parameters. By independently validating the elevation accuracy of the calibrated results, both the proposed digital calibration method and detector calibration method exhibit good consistency in footprint elevation bias. The RMSE between the footprint elevations obtained from both methods and the high-precision airborne LiDAR point cloud elevations is less than 0.3 m. The method proposed in this paper is not only ensures accuracy, but also reduces the consumption of human and material resources, providing a new approach and method for on-orbit normalization calibration of spaceborne laser altimeters.

Key words: linear system laser altimeter, in-orbit geometric calibration, digital calibration method

CLC Number:

ZHANG Hao, XU Qi, HUANG Peiqi, CHEN Gang, XIE Huan. High-precision terrain-based on-orbit geometric calibration method for laser altimeter[J]. Bulletin of Surveying and Mapping, 2024, 0(7): 41-47.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://tb.chinasmp.com/EN/10.13474/j.cnki.11-2246.2024.0708

http://tb.chinasmp.com/EN/Y2024/V0/I7/41

References

[1] ZHOU Hui,CHEN Yuwei,MA Yue,et al.The effect of terrestrial surface slope and roughness on laser footprint geolocation error for spaceborne laser altimeter[J].Photogrammetric Engineering & Remote Sensing,2018,84(10): 647-656.
[2] 李国元,唐新明,王华斌,等.GLAS激光测高数据辅助的资源三号三线阵区域网平差研究[C]//第三届高分辨率对地观测学术年会(地面系统与应用技术分会)优秀论文集.北京:[s.n.],2014: 91-105.
[3] 唐新明,李国元.激光测高卫星的发展与展望[J].国际太空,2017(11): 13-18.
[4] TONG Xiaohua,YE Zhen,XU Yusheng,et al.Framework of jitter detection and compensation for high resolution satellites[J].Remote Sensing,2014,6(5): 3944-3964.
[5] XIE Junfeng,TANG Xinming,MO Fan,et al.ZY3-02 laser altimeter footprint geolocation prediction[J].Sensors,2017,17(10): 2165.
[6] LUTHCKE S,ROWLANDS D,HARDING D,et al.Laser altimeter pointing,ranging and timing calibration from integrated residual analysis: a summary of early mission results[J].Environmental Science,Engineering,2004:53006430.
[7] XIE Junfeng,LIU Ren,TANG Xinming,et al.A geometric calibration method without a field site of the GF-7 satellite laser relying on a surface mathematical model[J].IEEE Transactions on Geoscience and Remote Sensing,2023,61: 3231902.
[8] 李少宁.星载激光对地测高系统在轨几何定标研究[D].武汉: 武汉大学,2017.
[9] 韩玲,田世强,谢俊峰.星载激光测高仪检校技术发展现状浅析[J].航天返回与遥感,2016,37(6): 11-19.
[10] 马跃,阳凡林,易洪,等.对地观测星载激光测高仪在轨姿态系统误差检校方法[J].红外与激光工程,2015,44(8): 2401.
[11] TANG Xinming,XIE Junfeng.GF-7 dual-beam laser altimeter on-orbit geometric calibration and test verification[J].Acta Geodaetica et Cartographica Sinica,2021,50(3): 384.
[12] TANG Xinming,XIE Junfeng,LIU Ren,et al.Overview of the GF-7 laser altimeter system mission[J].Earth and Space Science,2020,7(1): e00777.
[13] 曹彬才,王建荣,胡燕,等.高分十四号激光测量系统在轨几何定标与初步精度验证[J].光学精密工程,2023,31(11): 1631-1640.
[14] 李国元,唐新明,樊文锋,等.基于地面红外探测器的星载激光测高仪在轨几何定标[J].红外与激光工程,2017,46(11): 1117004.
[15] 唐新明,陈继溢,李国元,等.资源三号02星激光测高误差分析与指向角粗标定[J].武汉大学学报(信息科学版),2018,43(11): 1611-1619.
[16] 唐新明,谢俊峰,付兴科,等.基于金字塔搜索地形匹配的星载激光在轨指向检校方法: CN106871932B[P].2019-12-24.
[17] LI Shaoning,LI Chaokui,ZHANG Guo,et al.Geometric calibration of satellite laser altimeters based on waveform matching[J].The Photogrammetric Record,2021,36(174):63-185.
[18] BLAIR J B,HOFTON M A.Modeling laser altimeter return waveforms over complex vegetation using high-resolution elevation data[J].Geophysical Research Letters,1999,26(16): 2509-2512.
[19] LIU Ren,XIE Junfeng.Calibration of the laser pointing bias of the GaoFen-7 satellite based on simulation waveform matching[J].Optics Express,2021,29(14): 21844-21858.
[20] 李国元,唐新明,周晓青,等.高分七号卫星激光测高仪无场几何定标法[J].测绘学报,2022,51(3): 401-412.
[21] 崔成玲,李国元,黄朝围,等.国内外星载激光测高系统发展现状及趋势[C]//中国测绘地理信息学会.南昌:[s.n.],2015.
[22] 伍煜,龙小祥,杨坚,等.高分七号卫星激光载荷指向变化规律分析及应用[J].光学学报,2021,41(23): 2328003.
[23] TANG Hao,STOKER J,LUTHCKE S,et al.Evaluating and mitigating the impact of systematic geolocation error on canopy height measurement performance of GEDI[J].Remote Sensing of Environment,2023,291: 113571.
[24] 谢俊峰,刘仁,莫凡,等.一种基于波形匹配的星载激光在轨指向检校方法: CN110646782B[P].2020-10-16.
[25] XU Yifang,DING Sheng,CHEN Peimin,et al.Horizontal geolocation error evaluation and correction on full-waveform LiDAR footprints via waveform matching[J].Remote Sensing,2023,15(3): 776.
[26] 唐新明,李国元,高小明,等.卫星激光测高严密几何模型构建及精度初步验证[J].测绘学报,2016,45(10): 1182-1191.
[27] HOLMES K,CHADWICK O,KYRIAKIDIS P.Error in a USGS 30-meter digital elevation model and its impact on terrain modeling[J].Journal of Hydrology,2000,233(1): 154-173.