测绘通报 ›› 2019, Vol. 0 ›› Issue (3): 145-147,162.doi: 10.13474/j.cnki.11-2246.2019.0097

• 测绘地理信息技术装备应用案例 • 上一篇    下一篇

基于MS60的BIM放样与施工结果精度分析

邓明镜1, 冉东1, 杨忠轩2, 黄恒1, 李昌义3   

  1. 1. 重庆交通大学, 重庆 400074;
    2. 徕卡测量系统贸易有限公司, 北京 100020;
    3. 中国五冶集团, 四川 成都 610063
  • 收稿日期:2018-12-31 出版日期:2019-03-25 发布日期:2019-04-02
  • 作者简介:邓明镜(1976-),男,博士,讲师,研究方向为工程测量与GIS。E-mail:78957026@qq.com

Precision analysis of BIM layout and construction results based on MS60

DENG Mingjing1, RAN Dong1, YANG Zhongxuan2, HUANG Heng1, LI Changyi3   

  1. 1. Chongqing Jiaotong University, Chongqing 400074, China;
    2. Leica Measurement System Trading Co., Ltd., Beijing 100020, China;
    3. China Wuye Group, Chengdu 610063, China
  • Received:2018-12-31 Online:2019-03-25 Published:2019-04-02

摘要: 随着各种异形建筑的不断出现,传统施工放样方法及检测技术已不能完全满足施工要求,因此需要引进新的施工放样及检测技术。本文结合重庆仙桃数据谷金融大楼项目,运用MS60的BIM放样与三维激光扫描技术,探究其在异形建筑施工放样及结果检测中的高效性、可靠性。在施工放样过程中,首先通过在BIM模型上选取放样点,利用MS60全站扫描仪自动搜索与追踪,简化施工放样流程;然后运用BIM模型与点云数据相结合的表面偏差分析对施工结果进行高精度分析,从而为后续施工提供参考。

关键词: MS60, BIM放样, 精度分析

Abstract: With the emergence of various special-shaped buildings,the traditional construction lofting methods and detection techniques can not fully meet the construction requirements,so it is necessary to introduce new construction lofting and detection techniques.Based on the project of Chongqing Xiantao Data Valley financial building,this paper uses MS60 BIM lofting and 3D laser scanning technology to explore its high efficiency and reliability in the construction of special-shaped building and the result detection.In this paper,first of all,in the process of construction lofting,by selecting the layout points on the BIM model and using the MS60 scanner to search and track automatically,the process of construction lofting is simplified,and then the surface deviation analysis of the BIM model and the point cloud data is used.The result of construction is analyzed with high precision,which provides a reference for subsequent construction.

Key words: MS60, BIM lofting, accuracy analysis

中图分类号: