测绘通报 ›› 2019, Vol. 0 ›› Issue (8): 1-7.doi: 10.13474/j.cnki.11-2246.2019.0241

    Next Articles

Preliminary analysis of observation quality and positioning precision for BDS-3 satellites

CHENG Junlong, WANG Wang, MA Liye, LIU Wanke   

  1. School of Geodesy and Geomatics, Wuhan University, Wuhan 430079, China
  • Received:2018-11-12 Revised:2019-04-29 Online:2019-08-25 Published:2019-09-06

Abstract: Analysis of the BDS-3 observation quality is very important for the upcoming relevant applications and research of BDS-3. This paper evaluates the observation quality of BDS-3 satellites, including the carrier noise ratio (C/N0), pseudo-range multipath, observation noise, and analyzes the precision of single-point positioning (SPP) and short-baseline relative positioning. The results show that the average C/N0 values for B1I of BDS-3 satellites are 3~4 dB/Hz higher than those of BDS-2 satellites. In terms of BDS-3 satellites signals, the average C/N0 values for B3I is the highest and the others are sizable. In the aspect of pseudo-range multipath values, B2a/B2b/B3I of BDS-3 working satellite and B3I of BDS-2 satellites are sizable, and those are slightly lower than that of B1I/B1C of BDS-3 satellites and that of B1I/B2I of BDS-2 satellites. As for observation noise, BDS-3 satellites and BDS-2 working satellites are on the same level. The precision of positioning that used BDS-2 and BDS-3 satellites is slightly greater than that only used BDS-2 satellites because of improving the observation geometry.

Key words: BDS-3 satellites, carrier noise ratio, pseudo-range multipath, observation noise, double-differenced residual, single-point positioning, relative positioning

CLC Number: