Experimental Study on the Tilt of Wind Turbine Tower by Using Laser Point Cloud Data

doi:10.13474/j.cnki.11-2246.2017.0375

测绘通报 ›› 2017, Vol. 0 ›› Issue (12): 38-42.doi: 10.13474/j.cnki.11-2246.2017.0375

Previous Articles Next Articles

Experimental Study on the Tilt of Wind Turbine Tower by Using Laser Point Cloud Data

XIE Hongquan^1,2, YANG Tao¹, XU Dewei³, QIN Yazhou³, LU Xia¹, WANG Chen⁴

1. School of Geomatics and Marine Information, Huaihai Institute of Technology, Lianyungang 222005, China;
2. Key Laboratory of Surveying and Mapping Technology on Island and Reef, National Administration of Surveying, Mapping and Geoinfomation, Qingdao 266590, China;
3. Lianyungang Sifang Surveying and Mapping Co. Ltd., Lianyungang 222047, China;
4. Institute of Geochemical Exploration and Marine Geological Survey, Nanjing 210007, China

Received:2017-07-06 Revised:2017-09-18 Online:2017-12-25 Published:2018-01-05

Abstract

Abstract: The daily operation and maintenance of the wind power tower is very important. It is of great practical significance to study the tilt observation of the wind power tower by using ground 3D laser scanning technology. Selection of maling wind power project 7# wind turbine tower as the research object, using the Leica C10 3D laser scanner laser point cloud data, and the data are processed by Cyclone software. Cyclone software is used to obtain the center coordinates of 40 sections of the tower barrel, and the slope is calculated and compared with that obtained by the synchronous total station. The results show that the ground-based three-dimensional laser scanning technique is more comprehensive and meets the requirements of monitoring accuracy, and has great application value.

Key words: 3D laser scanning technology, wind power tower, tilt observation, total station instrument

CLC Number:

P234.5

XIE Hongquan, YANG Tao, XU Dewei, QIN Yazhou, LU Xia, WANG Chen. Experimental Study on the Tilt of Wind Turbine Tower by Using Laser Point Cloud Data[J]. 测绘通报, 2017, 0(12): 38-42.

References

[1] 谢雄耀,姜毅,卢晓智,等.超高压服役杆塔病害及三维激光扫描检测技术[J].地下空间与工程学报,2014,10(3):668-674.
[2] 戴靠山,徐一智,公羽,等.三维激光扫描在风电塔检测中的应用[J].结构工程师, 2014,30(2):111-115.
[3] 刘云备,蔡来良,王珊珊,等.基于TLS的高压线塔倾斜度监测[J].测绘工程, 2016, 25(8):65-69.
[4] 宋宗跃,赵晋睿,王玲玲,等.浅谈天宝TX8三维激光扫描仪在风电场风机塔筒垂直度监测中的应用[J].测绘通报,2016(7):146-147.
[5] 李广云,李明磊,王力,等.地面激光扫描点云数据预处理综述[J].测绘通报,2015(11):1-3.
[6] 周保兴,岳建平,张磊,等.基于地面三维激光扫描技术的建筑物整体位移监测[J].测绘通报,2013(10):76-79.
[7] 黄承亮.激光扫描技术下桥梁变形监测方法的研究[J].测绘通报,2015(S0):206-209.
[8] 罗建,孙德鸿,蒋涛.三维激光扫描在自升式钻井平台桩腿变形测量中的应用[J].测绘通报,2013(5):50-53.
[9] 李建敏,程光亮.三维激光扫描支持下电视塔变形监测试验研究[J].城市勘测, 2011(4):138-141.
[10] 张厚禄,陈雯超,王恒东.三维激光扫描技术在塔形建筑物变形观测中的应用[J].青海国土经略,2015(2):58-61.
[11] 韩腾腾,陶禹.三维激光扫描技术在煤矿井架变形监测分析中的应用[J].山东煤炭科技,2017(6):137-139.
[12] 蔺小虎,姚顽强,张咏,等.基于地面三维激光扫描技术的输煤栈桥支架倾斜监测[J].煤矿安全,2016,47(9):110-113.
[13] 孙文潇,王健,刘春晓.三维激光扫描在古建筑中的应用[J].测绘科学, 2016, 41(12):297-301.
[14] 谢宏全,谷风云.地面三维激光扫描技术与应用[M].武汉:武汉大学出版社,2016.
[15] 王锦华,隋俭武.风力发电塔变形监测方法研究[J].现代测绘,2016,39(6):19-21.

Experimental Study on the Tilt of Wind Turbine Tower by Using Laser Point Cloud Data

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	NI Fei, WANG Haocheng, YANG Yizhuo, YANG Xiaobo. Application of 3D laser scanning technology in contactless deformation monitoring for expressway operation [J]. Bulletin of Surveying and Mapping, 2021, 0(3): 164-166.
[2]	LI Zhiyuan, LI Digui, WANG Jian, SONG Yu. Rapid extraction method of building facade in urban redevelopment [J]. Bulletin of Surveying and Mapping, 2021, 0(2): 164-166.
[3]	ZHU Mingran. Application of 3D laser scanning technology applying to super-huge and complex steel sculpture engineering construction [J]. 测绘通报, 2019, 0(8): 92-95.
[4]	XU Yajun, XIE Hairong, YUAN Xiaojun, CHE Honglei. Application of three dimensional laser scanning technology in detecting the construction axis of heteromorphic buildings [J]. 测绘通报, 2019, 0(8): 162-164.
[5]	WANG Min, DU Weiji, DUAN Wei. Model reconstruction and application of air defence fortifications based on 3D laser scanning [J]. 测绘通报, 2019, 0(5): 148-151.
[6]	GAO Xixi, ZHOU Dongming, CUI Weijiu. Research on the application of ancient architecture based on 3D laser scanning and BIM [J]. 测绘通报, 2019, 0(5): 158-162.
[7]	WANG Qingguo, ZHAO Hai, LI Jianping. Landslide monitoring by merging ground laser point cloud and aerial image [J]. 测绘通报, 2019, 0(4): 99-102.
[8]	CHEN Meng, DU Zhixing, ZHANG Tao. The determination of building inclining state based on subregional regression model [J]. 测绘通报, 2019, 0(3): 71-75.
[9]	WANG Renyin, CHEN Rui, LI Kaiwei, YE Bo. Application of 3D laser technology in automatic measurement of sand-stone square [J]. Bulletin of Surveying and Mapping, 2019, 0(11): 156-159.
[10]	YANG Zhijian. Methods and comparative analysis of tunnel structure section measuring [J]. Bulletin of Surveying and Mapping, 2019, 0(11): 160-162.
[11]	PENG Jinsong, YE Bo, LI Juan, ZHOU Guangming. Application of 3D Laser Scanning Technology in Building Facade Measurement [J]. 测绘通报, 2018, 0(7): 156-159.
[12]	LI Qing, GAO Xiangwei, FEI Xianyun, ZHANG Hong, WANG Jian, CUI Yunjian, LI Bin. Construction of Tree Crown Three-dimensional Model Using Alpha-shape Algorithm [J]. 测绘通报, 2018, 0(12): 91-95.
[13]	WANG Lingfeng, QI Minmin, XU Yezhang, DUAN Wenyi. The Application of 3D Laser Scanning Technology in Safety Identification of Water Conservancy Engineering [J]. 测绘通报, 2018, 0(12): 156-158.
[14]	LIU Huan, WANG Lijuan, PEI Nisong, ZHAO Peng, MA Song, XIAO Meng. The Application of Three-dimensional Laser Scanning Technology in Micangshan Extra-long Tunnel Construction [J]. 测绘通报, 2017, 0(9): 83-87,115.
[15]	WANG Feng. Topographic Mapping Using 3D Laser Scanning Technology Integrated with RTK [J]. 测绘通报, 2017, 0(3): 71-75.