一种测量全站仪仪器高度的简便方法

doi:10.13474/j.cnki.11-2246.2017.0161

测绘通报 ›› 2017, Vol. 0 ›› Issue (5): 85-87.doi: 10.13474/j.cnki.11-2246.2017.0161

一种测量全站仪仪器高度的简便方法

吕海波¹, 董均贵², 吴畏²

1. 桂林理工大学研究生院, 广西桂林 541004;
2. 桂林理工大学土木与建筑工程学院, 广西桂林 541004

收稿日期:2016-09-02 修回日期:2017-01-08 出版日期:2017-05-25 发布日期:2017-06-03
通讯作者: 董均贵
作者简介:吕海波(1973-),男,博士,教授,主要从事特殊土工程特性研究工作。E-mail:lhb@glut.edu.cn
基金资助:
国家自然科学基金（51169005）；广西自然科学基金创新团队项目（2012GXNSFGA060001）

A Simple Method to Measure the Height of Total Station

LÜ Haibo¹, DONG Jungui², WU Wei²

1. School of Graduate Guilin University of Technology, Guilin 541004, China;
2. College of Civil Engineering, Guilin University of Technology, Guilin 541004, China

Received:2016-09-02 Revised:2017-01-08 Online:2017-05-25 Published:2017-06-03

摘要/Abstract

摘要： 总结已有研究成果，基于正余弦定理，借助万能角度尺和钢卷尺，提出了一种测量全站仪仪器高度的新方法，并对该方法误差影响因素进行了分析。该方法受测量地形环境影响小，测量精度高，操作简便。且适用于其他同类测量仪器，对实际工程测量具有一定意义。

关键词: 正弦定理, 余弦定理, 仪高测量, 新方法

Abstract: The previous achievements were summarized. With the help of universal angle ruler and steel tape, a new method based on the principle of sine cosine theorem was proposed to measure the height of total station. And the influential factors of error were analyzed. The method has high measuring accuracy and applicability. Yet, the topography affection to it is not obvious. It can be used to other similar measuring instruments. The new method has a certain significance to the actual engineering.

Key words: the law of sines, the law of cosines, instrument height measurement, new method

中图分类号:

P204

吕海波, 董均贵, 吴畏. 一种测量全站仪仪器高度的简便方法[J]. 测绘通报, 2017, 0(5): 85-87.

LÜ Haibo, DONG Jungui, WU Wei. A Simple Method to Measure the Height of Total Station[J]. 测绘通报, 2017, 0(5): 85-87.

[1]	付翔宇, 杨丽坤, 李富荣, 刘云利. 基坑水平位移监测新方法的探讨与应用--固定方位角-视准线法[J]. 测绘通报, 2016, 0(2): 113-115,139.
[2]	赵文, 刘邢巍, 袁鹏. 七参数坐标转换中一种削弱高程误差影响的新方法[J]. 测绘通报, 2016, 0(1): 11-14,27.

一种测量全站仪仪器高度的简便方法

A Simple Method to Measure the Height of Total Station

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价