测绘通报 ›› 2019, Vol. 0 ›› Issue (6): 57-60,84.doi: 10.13474/j.cnki.11-2246.2019.0184

• 学术研究 • 上一篇    下一篇

基于Voronoi图的正射影像镶嵌网络生成与优化方法

陈松, 周平, 李显巨, 陈刚   

  1. 中国地质大学(武汉), 湖北 武汉 430074
  • 收稿日期:2019-03-10 修回日期:2019-04-11 出版日期:2019-06-25 发布日期:2019-07-01
  • 通讯作者: 陈刚。E-mail:ddwhcg@cug.edu.cn E-mail:ddwhcg@cug.edu.cn
  • 作者简介:陈松(1993-),男,硕士生,主要研究方向为3S技术融合与应用。E-mail:mr.chens@outlook.com
  • 基金资助:

    国家自然科学基金(41674015;41701516)

Seamline network generation and optimization for orthoimage mosaicking based on Voronoi diagrams

CHEN Song, ZHOU Ping, LI Xianju, CHEN Gang   

  1. China University of Geosciences, Wuhan 430074, China
  • Received:2019-03-10 Revised:2019-04-11 Online:2019-06-25 Published:2019-07-01

摘要:

提出一种基于Voronoi图的正射影像镶嵌网络生成与优化方法。首先以每幅DOM影像有效区域中心点作为种子点生成Voronoi图,确定每幅影像的有效镶嵌多边形并构建全局镶嵌网络;然后结合DSM数据对镶嵌多边形顶点位置进行调整,避免最终镶嵌结果影像出现无数据区域,同时可以使顶点避开建筑、树木等存在投影差的区域,以便对初始镶嵌线进行调整优化。试验表明,本文方法切实可行并且具有较好的自适应性。

关键词: 数字正射影像, 数字表面模型, 影像镶嵌, 镶嵌网络, Voronoi图

Abstract:

In this study, a global seamline network generation and optimization method based on Voronoi diagrams is proposed for orthoimage mosaicking. First, from the centers of valid areas for each orthoimage, the Voronoi diagrams algorithm is applied to generate a globally consistent seamline network, determining the mosaic polygon of each orthoimage. Then, vertices of the mosaic polygon are relocated with the use of DSM to avoid holes in the final photomosaic and ensure those vertices are located on the ground area. So that the seamline can avoid crossing objects with large projection difference such as buildings and trees after being further optimized. Experiment results demonstrate that the proposed method is feasible and has good adaptability.

Key words: digital orthophoto map, digital surface model, orthoimage mosaicking, seamline network, Voronoi diagrams

中图分类号: