测绘通报 ›› 2017, Vol. 0 ›› Issue (5): 100-104.doi: 10.13474/j.cnki.11-2246.2017.0164

• 技术交流 • 上一篇    下一篇

利用AutoCAD二次开发实现地形图高程点与等高线错误自动查找

刘洪1, 黄军胜2   

  1. 1. 广西有色勘察设计研究院, 广西 南宁 530031;
    2. 广西壮族自治区水利电力设计研究院, 广西 南宁 530023
  • 收稿日期:2016-11-22 修回日期:2017-02-06 出版日期:2017-05-25 发布日期:2017-06-03
  • 作者简介:刘洪(1974-),男,硕士,高级工程师,从事大地测量与测绘工程工作。E-mail:36682165@qq.com

Using Secondary Development of AutoCAD to Automatically Find Errors of Elevation Points and Contour Lines in Digital Topographic Map

LIU Hong1, HUANG Junsheng2   

  1. 1. Guangxi Nonferrous Survey and Design Institute, Nanning 530031, China;
    2. Guangxi Water and Power Design Institute, Nanning 530023, China
  • Received:2016-11-22 Revised:2017-02-06 Online:2017-05-25 Published:2017-06-03

摘要: 论述了数字地形图中产生高程点与等高线错误的可能原因,分析了高程点和等高线在地形图中的空间位置关系及作为判断条件的数学关系,论述了解决问题的办法和判断规则,展示了通过编制计算机程序实现找出其错误的核心代码,此研究对于减轻质检人员在检查数字地形图的高程点与等高线错误时的劳动强度和提高工作效率很有意义。

关键词: 数字地形图, 等高线, 高程点, 点线不符, C#

Abstract: This paper discusses the possible causes of the elevation point and contour errors in digital topographic map, analyzes the spatial location relationship and the mathematical relationship of the elevation point and contour in the topographic map, with the mathematical relationship working as a judgment condition. It discusses the solutions and judgment rules, and shows the realization of finding out its mistakes'core codes through computer program. This research is very meaningful to reduce the labor intensity of inspection personnel while checking elevation point and contour errors in the digital topographic map so as to improve the working efficiency.

Key words: digital topographic map, contour, elevation point, no conformation between the point and line, C#

中图分类号: