Application of Trimble TX8 3D laser scanner in capacity measurement of horizontal metal tank

doi:10.13474/j.cnki.11-2246.2019.0170

Abstract

Abstract: Based on the application requirement of gas station to the internal handover of horizontal metal tank, the volume measurement and calibration of Trimble TX8 3D laser scanner are carried out in this paper. Compared with the traditional volume comparison method and laser lattice method, the data of 20 m³ horizontal metal tank in a gas station are analyzed and modeled. The test data show that in horizontal metal tank, compared with laser lattice method, the calibration of tank volume of Trimble TX8 is more consistent, and the modeling is more comprehensive, intuitive and efficient. It also provides the possibility for its application in other measurement fields and mechanical modeling.

Key words: 3D laser scanner, Trimble TX8, horizontal metal tank, metrology

CLC Number:

P258

GU Tianping. Application of Trimble TX8 3D laser scanner in capacity measurement of horizontal metal tank[J]. 测绘通报, 2019, 0(5): 152-154.

References

[1] 王顺利,李晓宇.关于影响立式金属罐油品静态计量准确性因素的分析[J].误差与不确定度,2013,33(5):66-69.
[2] 康习军.浅谈三维激光扫描仪在测量中的应用[J].科技视界,2015(2):86.
[3] 李刚.三维激光扫描技术及其应用探讨[J].华东科技(学术版),2014(8):7-8.
[4] 万雪华,王继卫,王锐.天宝TX8三维激光扫描仪在地形图测量中的应用[J].地矿测绘,2016,32(3):10-14.
[5] 谢武强,宋杨,王峰,等.三维激光扫描仪在建筑物立面测量中的应用[J].城市勘测,2013(1):12-14.
[6] 王金涛,刘子勇,张珑,等.大型油罐容量计量中3D空间建模方法研究与比对试验分析[J].仪器仪表学报,2010,31(2):421-425.
[7] 范亮.基于激光扫描技术的三维建模测量应用研究[J].世界有色金属,2017(6):38-39.
[8] 周颖熙.孙彦锋. 基于三维激光扫描法的半径测量不确定度分析[J].仪器仪表标准化与计量,2017(3):37-39.
[9] 张柱柱,焦光伟,王亚超,等.立式罐变形检测中三维点云数据处理方法[J].重庆理工大学学报(自然科学版),2017,31(5):68-74.
[10] 佟林,王金涛,刘子勇,等.立式金属罐圈板变形测量方法初探[J].应用与试验,2015,28(6):83-85.
[11] 陈贤雷,郝华东,李红军,等.大型立式罐容量计量中三维激光扫描方法研究[J].中国测试,2014,40(2):44-48.
[12] 童魁,邹进贵,朱勇超.地面三维激光扫描仪测距测角精度分析[J].地理空间信息,2017,15(5):91-93.
[13] 李哲,赵玉凯,李军医.地面三维激光扫描仪扫描精度检定[J].测绘与空间地理信息,2017,40(7):182-185.
[14] 张柱柱,焦光伟,祁志江,等.基于三维激光扫描技术的拱顶油罐罐顶变形检测[J].后勤工程学院学报,2017,33(3):40-43.
[15] 李斌,尹潇,卢涛.天宝TX8三维激光扫描仪在风电厂风机变形监测中的应用[J].测绘通报,2016(3):148-149.