Application of 3D laser scanner in actual measurement of electric power engineering

doi:10.13474/j.cnki.11-2246.2021.327

Abstract

Abstract: In order to solve the problems of low efficiency and poor reliability of data accuracy obtained by manual aerial operations in some work of traditional power engineering, this paper proposes to apply three-dimensional laser measurement technology to the field of power engineering, by taking advantage of non-contact measurement, safety and high speed, high data accuracy and reliability of the three-dimensional laser scanner to reduce the errors caused by human factors in the measurement.The experimental results show that the error between the result of the electric tower height measurement, clearance height measurement and coordinate measurement measured by this technology and by the total station is within the range of allowable error.

Key words: 3D laser scanner, actual measurement, electricpower engineering, precision analysis

CLC Number:

P237

WEN Yuwei, DENG Changyong, ZENG Depei, WENG Xiangyang, QIU Rongfu. Application of 3D laser scanner in actual measurement of electric power engineering[J]. Bulletin of Surveying and Mapping, 2021, 0(10): 163-167.

[1]	JING Haoran, XU Jinghai. Registration of unmanned aerial vehicle point clouds and terrestrial 3D laser scanner point clouds for irregular buildings [J]. Bulletin of Surveying and Mapping, 2022, 0(6): 32-39.
[2]	WANG Xiaojing, TANG Chao, WANG Yong, HOU Haiqian, YANG Xiaofei. High-precision navigation and positioning method with limited error divergence algorithm under closed environment [J]. Bulletin of Surveying and Mapping, 2021, 0(8): 65-68,73.
[3]	WANG Xiaoming. Application of GEDO IMS system in the precision measurement of ballast railway [J]. Bulletin of Surveying and Mapping, 2021, 0(8): 154-157.
[4]	ZHANG Jinying, CUI Liang, LIU Zengmin, WANG Xintian, LIN Lin, XU Fengling. Large-area surface deformation monitoring using Sentinel-1 SAR data and SBAS technology [J]. Bulletin of Surveying and Mapping, 2020, 0(7): 125-129.
[5]	GU Tianping. Application of Trimble TX8 3D laser scanner measurement in mountain area [J]. Bulletin of Surveying and Mapping, 2020, 0(7): 156-158.
[6]	YANG Deng, WANG Jian, WANG Minmin, ZHANG Yalei. Analysis of influence of emergency environment anchor deployment on positioning accuracy [J]. Bulletin of Surveying and Mapping, 2020, 0(5): 90-94.
[7]	LU Peiqing, TANG Chao. Application of mobile 3D laser scanning technology in deformation monitoring of subway tunnels [J]. Bulletin of Surveying and Mapping, 2020, 0(5): 155-157,160.
[8]	WANG Yunchuan, DUAN Ping, LI Jia, YAO Yongxiang, CHENG Libo. A review of 3D modeling methods for different route planning of multi-rotor single-lens UAVs [J]. Bulletin of Surveying and Mapping, 2020, 0(3): 105-108.
[9]	ZHOU Qinkun, YUE Jianping, YANG Heng, ZHU Yimin. Automatic extraction and reconstruction of powerlines from airborne LiDAR point clouds [J]. Bulletin of Surveying and Mapping, 2020, 0(10): 26-30,37.
[10]	SHI Shuochong, ZHOU Xinghua, LI Jie, YANG Long, TANG Qiuhua, LIU Senbo. The development of shipborne over water and under water intergrated mapping system [J]. 测绘通报, 2019, 0(9): 7-12,17.
[11]	GU Tianping. Application of Trimble TX8 3D laser scanner in capacity measurement of horizontal metal tank [J]. 测绘通报, 2019, 0(5): 152-154.
[12]	MA Haiying, HU Yueming, YAO Chaolong, FAN Yanan, HU Bixia, ZHANG Wei. Plane coordinate conversion methods and precision analysis in consideration of topographic relief [J]. 测绘通报, 2019, 0(2): 91-94,112.
[13]	XIE Hongquan, CHEN Yuetao, ZHAO Fang, TIAN Dongwei, LU Xia. Experimental study on accuracy of mapping large scale topographic map by knapsack mobile laser scanning system [J]. 测绘通报, 2019, 0(2): 141-143,156.
[14]	TAN Jimeng, ZHANG Pengfei, SHAO Shicheng, LIU Xiuhan. Application of 3D mobile laser scanner in measurement of underground pipe gallery [J]. Bulletin of Surveying and Mapping, 2019, 0(12): 156-158,162.
[15]	WU Shaofeng, DU Hongtao. Mobile Laser Scanning Technology Combined with Trimble Realworks Application in Highway Survey [J]. 测绘通报, 2018, 0(9): 152-155.

Application of 3D laser scanner in actual measurement of electric power engineering

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments