测绘通报 ›› 2017, Vol. 0 ›› Issue (2): 129-132,150.doi: 10.13474/j.cnki.11-2246.2017.0066

• 技术交流 • 上一篇    下一篇

结合三维量测数据的绝缘子选型与评估方法

金翼1, 赵锋1, 苗堃1, 许焱1, 刘亚文2, 唐敏2   

  1. 1. 国网河南省电力公司济源供电公司, 河南 济源 459000;
    2. 武汉大学遥感信息工程学院, 湖北 武汉 430079
  • 收稿日期:2016-03-15 修回日期:2016-10-19 出版日期:2017-02-25 发布日期:2017-03-01
  • 通讯作者: 刘亚文
  • 作者简介:金翼(1970-),女,教授级高级工程师,研究方向为电力系统自动化。E-mail:1917389914@qq.com
  • 基金资助:

    中央高校基本科研业务费专项基金(2042014kf0294);国网河南省电力公司济源供电公司科技项目(SGTYHT/14-JS-191)

Insulator Selection and Evaluation with Its Three Dimensional Measurement Data

JIN Yi1, ZHAO Feng1, MIAO Kun1, XU Yan1, LIU Yawen2, TANG Min2   

  1. 1. State Grid Jiyuan Electric Power Supply Company, Jiyuan 459000, China;
    2. School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079, China
  • Received:2016-03-15 Revised:2016-10-19 Online:2017-02-25 Published:2017-03-01

摘要:

绝缘配置可以在综合降低线路设备外绝缘配置成本和防污维护成本的基础上,从根本上降低污闪事故的发生概率,完备的绝缘子数据能够为科学合理的绝缘配置与选型提供可靠的支持。本文提出了一种新的绝缘子数据选型与评估方法,结合绝缘子三维量测数据及防污闪关键影响因子,采用多条件选型与评估模式,实现了绝缘子快速选型,极大提高了绝缘配置的效率。

关键词: 绝缘子三维量测, 绝缘子数据, 绝缘子选型与评估

Abstract:

Insulation configuration can fundamentally reduce the probability of pollution flashover on the basis of lowering the external insulation configuration and the maintenance cost. The complete insulator data can provide reliable support for scientific and reasonable insulation configuration and selection. A new method for selecting and evaluating insulator that connected 3D measurement data of insulators and key influencing factors of anti pollution flashover is proposed. Multi-condition selection and evaluation model are used in this method that realized the rapid insulator selection and greatly improved the efficiency of insulation configuration.

Key words: insulator 3D measurement, insulator data, insulator selection and evaluation

中图分类号: